增强型 精密粗糙度轮廓测量仪

---

时间:2013-9-29

TW-LK-01增强型精密粗糙度轮廓测量仪广泛应用于机械加工、汽车、轴承、机床、摸具、精密五金、光学加工等行业。仪器驱动箱提供了一个行程为100毫米长的高精度直线基准导轨，传感器沿导轨作直线运动，位移量通过精密光栅位移传感器进行数据采集。驱动箱可通过水平调节钮作±10度的水平调整，并可分别通过控制箱的操作键或软件界面进行水平和垂直方向的移动。仪器专用测量软件，在WINDOWS XP操作系统下的测量软件操作直观方便，功能丰富。

可测量各种精密机械零件的粗糙度和轮廓形状参数。用拟合法可评定半径、两圆中心距角度、距离等。从而可测量直线度、凸度、沟心距、倾斜度、垂直距离、水平距离、台阶等形状参数。

It is widely used in metrological departments of industries of autos, tools, bearings, Patterns, and optics for measuring profile and roughness of precision parts. The drive box is equipped with a straight-line guide of high accuracy traveling up to 100 mm. The displacement of the transducer moving along the guide collected with a precision grating system. The transducer is operated with either keys on the control box or the buttons on the window interface. The JB-5CP software runs on Windows XP.

It is used to measure the form and roughness of profiles of precision parts. In addition to roughness, by fitting least-square line of nominal form, a variety of form parameters can be measured, such as radius, angle, straightness, convexity, vertical and horizontal distance, and distances between points, circles, and slots.

 

 

 

 

 

 

 

 

型号 Type	TW-LK-01
粗糙度测量   For Roughness measurement
测试参数 Evaluation Parameters	Ra,,Rz,RS,RSm,Rp,Rv,Rq,Rt,Rmax,D, Rmr曲线等
取样长度 Sampling length	L: 0.08, 0.25, 0.8, 2.5,8mm
评定长度 Evaluation length	1L-5L可任意长度
测量范围 Roughness range	Ra 0.01-10μm
最小显示值 Resolution	0.001um
范围与分辨率之比Resolution	65,536:1
仪器示值误差 Indication error	≤±5%
测量工件最大高度 Max.specimen height	300mm
采样速度 Scanning speed	0.5 mm/sec，1mm/sec
移动速度 Scanning speed	2 mm/sec
轴向测量范围 Longitudinal rangey	40 mm
线性区 Linear range	垂向Vertical 600 um
轴向测量范围 Longitudinal range	100mm
小孔测量范围 Measurable range of bore	≥ф5 mm
可调工作台 Universal stage	旋转角度Rotation ±10度 摆动范围 Declination ±10度 X-Y移动范围 Adjustment 15 mm
轮廓测量   For Profile measurement
测量范围 Measuring range	X：100mm Z：10mm
传感器量程 Range selection	X：100mm Z：10mm
范围与分辨率之比 Range-Resolution rate	65,536:1
半径误差 Radius error	0.1%-1.0%
使用范围 Max specimen height	X：100mm Z: 370mm
操作系统 Operation System	Win98/2000/XP
电源 Power supply	AC220V±10% 50HZ
标准配件，附件   Standard parts&attachments	粗糙度轮廓仪主机Main machine 支柱及大理石底部 Column & Base  控制器 Control box  驱动装置 Driving unit  传感器 Transducer  可调工作台 Universal adjustable stage   V型台   Vstage    夹具Clamp   标准型触针Standard type probe   小孔型触针Special probe for small bore    轮廓触针 Profie probe    粗糙度样板Glass roughness sample    轮廓标准球Standard profilw ball    说明书 Operating manual   电脑客户选配
净重 Net weight	110 Kg
尺寸 Dimensions	620mmX400mmX720mm